Billings roofs face intense hail and high winds during summer storms plus heavy snow loads in winter. A post-storm inspection must check beyond visible dents because asphalt shingles on homes built before 1980 in the South Side and Heights often hide cracked underlayment or displaced flashing around chimneys. Inspectors walk the entire surface, probe soft spots, and examine attic insulation for moisture stains that indicate active leaks from wind-driven rain funneled by the Rimrocks.
Cold semi-arid conditions create rapid freeze-thaw cycles that widen small hail fractures within weeks. In North Park and Downtown Billings, older cedar shake and three-tab roofs require close attention to ridge vents and step flashing where ice dams form after storms. We document granule loss, lifted tabs, and dent patterns on metal panels so homeowners receive clear photos and notes for insurance claims without unnecessary repairs.
Yellowstone County building practices and common roof pitches on West End ranches mean water can pool behind gutters clogged by storm debris. We also evaluate soffit and fascia integrity because strong winds frequently pull these loose on homes near the Yellowstone Art Museum area. Every inspection ends with a written summary that notes immediate safety issues versus cosmetic damage that can wait until spring.
Technician insight
In Billings the thing that catches most people out with Roof Inspection After A Storm is how quickly small hail cracks on older three-tab shingles in the Heights turn into leaks once the first hard freeze hits; homeowners often miss the underlayment damage because they only look from the street.
West End hail follow-up
After a July storm a West End homeowner noticed scattered dents. We found multiple cracked shingles and displaced step flashing around a skylight that had allowed water into the attic insulation. We documented every impact, replaced the compromised flashing the same week, and the insurance claim closed without dispute.
Roof Inspection After a Storm Services We Offer
✓Hail Damage Assessment
Detailed mapping of hail impact on shingles, metal panels, and skylights with photos sized for insurance adjusters in Billings.
✓Wind Uplift Inspection
Checks for lifted shingles, loosened ridge caps, and compromised flashing after high-wind events common along the Rimrocks.
✓Attic Moisture Mapping
Uses infrared and visual checks inside attics to locate hidden leaks from wind-driven rain that often appear weeks later in South Side homes.
✓Gutter and Drainage Evaluation
Inspects gutters, downspouts, and fascia for storm debris clogs that lead to ice dams during Billings cold winters.
✓Flashing and Sealant Review
Examines all roof-to-wall transitions, vent boots, and chimney flashings that frequently fail after freeze-thaw cycles.
Roof Inspection After a Storm Cost in Billings, MT
| Service | Typical Range | What Affects It |
|---|---|---|
| Standard post-storm inspection | $225–$375 | Single-story homes in the Heights or South Side; price rises with steep pitches or two-story structures. |
| Inspection plus moisture meter readings | $300–$450 | Added when attic access shows possible hidden leaks after heavy rain. |
| Drone documentation add-on | $125–$175 | Used for complex roofs near the Rimrocks or when walking the surface poses safety concerns. |
Ranges are typical for Billings, MT and confirmed with an exact written quote before any work starts.
How it works
- 1
Schedule and Site Walk
We arrive within 48 hours of your call and start with a ground-level review of the roof edges and yard for fallen debris.
- 2
Surface and Edge Inspection
Climb the roof to document hail dents, lifted tabs, and damaged flashing while noting slope and material type.
- 3
Attic and Interior Check
Enter the attic to look for moisture stains, insulation damage, and daylight around penetrations.
- 4
Report and Photos
Deliver a written summary with marked photos that homeowners can forward directly to their insurance company.
Pricing
Flat fee for most single-family homes with add-ons only when drone or moisture meter work is required.